Expansion Joint Devices AQUASTOP Type DSHO – 24 – ANG/040

dsho-020_ugl
montazhnaja-dsho-24-ugl

Expansion Joint Device AQUASTOP DSHO-24-ANG/040 is a 3-meter long embedded expansion joint. This device is suitable for both indoor spaces and open areas. Engineered for angular connections (wall-floor, wall-ceiling) in critical structures. Reduces stresses caused by shrinkage and temperature fluctuations. Withstands light vehicle load.

Displacement, mm

Compression: 5
Tension: 5
Shear: 4

1489,00 ₽

Price/l.m.
loader-icon

Expansion Joint Devices AQUASTOP Type DSHO-24-ANG/040 – designed for protecting angular joints in horizontal and vertical structures (wall joints, floor, ceiling, transitions between rooms) in areas with high pedestrian and light vehicle traffic: shopping centers, warehouses, office spaces. Joint width — 40 mm. Suitable for joints in floor structures with thickness — 24 mm. The guides are installed using embedded method. The device consists of perforated aluminum guides and an elastic profiled compensator made of thermoplastic elastomer (TPE) in the center.

Technical advantages:

    • Material: aluminum guides (GOST standard), compensator — wear-resistant TPE.
    • Strength: designed for mechanical and operational loads.
    • Corrosion resistance: resistant to moisture, temperature fluctuations, aggressive environments.
    • Durability: aluminum is corrosion-resistant, compensator can be replaced without dismantling the profile.

Installation:

  • Installation method: embedded, with fixation of guides in concrete base.
  • Mounting: 3-meter long aluminum pressure bars, anchors or dowels.
  • Specifics: angular execution for complex joints (e.g., wall-floor transitions).

Additional information

Compensator Material

TEP
Country of manufacture

Russia
Profile Type

Angular
Installation Type

Embedded
Load - MPa

0,25
A (Joint Width), mm

40
Length

3000 mm
B (Insert Width), mm

40
C (Profile Width), mm

100
Profile Height, mm

24

Installation Guidelines for AQUASTOP® DSHO Expansion Joint Devices

  1. Preparatory Work:
    • Clean the base surface from dirt, debris, and dust.
    • If necessary, level the base with a polymer-cement mixture or equivalent.
    • Repair defects (cracks, pores, exposed reinforcement).
  2. Temperature Conditions: Perform work at air temperatures between +5°C and +30°C.
  3. Layout and Gaps:
    • Install beacons according to the finished floor level (starting from a reference point near the wall).
    • Leave a damping gap ≤10 mm along the perimeter of the walls.
  4. Device Installation:
    • Assemble the sections, embedding the supporting parts into adhesive/sealant.
    • Join sections with 150 mm staggered seams.
    • ⚠️ Prohibited: Use anchor fasteners.
  5. Additional Operations (if required):
    • Fill gaps with polyurethane sealant.
    • Perform thermal welding of the compensator (185-195°C).
    • Apply primer (composition: specify in the project).
DSHO-24 corner installation diagram
DSHO-24 installation diagram

 

Universal Requirements:
- Compliance with SP 71.13330-2017;
- Check base evenness with a straightedge (tolerance: ≤2 mm longitudinally, ≤1 mm transversely);
- Fastener tightening torque: (specify for particular model);
- All parameters (A, B, C) are determined by the project.

⚠️ Important! For non-standard conditions, consult OOO TD "GYDROMIX".

Download Files for AQUASTOP® DSHO Expansion Joint Devices

PDFDownload Aquastop Product Catalog Part 2: Expansion Joint Devices
PDFDownload AQUASTOP DSHO Device Specifications

Recently viewed products

No recently viewed products to display

Related products

Request a Quote

Blank Form (#2)

2009 – 2025 GYDROMIX – Waterproofing, Repair, and Protection – Foundations, Utility Entry Points, Roofs, and Reservoirs
Privacy Policy

8 800 500-73-22

hello@hitcord.ru